Galletti LED 503 Bedienungsanleitung Seite 15

LED 503
PARAMETER CONFIGURATION PROCEDURE
Switch the thermostat OFF by pressing the FAN key for a prolonged span
Press the UP and DOWN keys simultaneously up to the password value 10:
use the UP and DOWN keys to scroll parameters P00 to P06:
Use the FAN key to view the current value of the parameter and then keys UP
and DOWN to change it.
At the end of the change, press the FAN key to return to parameter scrolling.
Press the MODE key to return to the start (OFF).
NB: The parameter configuration phase is of limited duration. Once a certain
time has elapsed (around 2 minutes) the thermostat will switch back into
the Off status and only the saved changes will be retained.
È severamente vietata la riproduzione anche parziale di questo manuale / All copying, even partial, of this manual is strictly forbidden
AVAILABLE CONFIGURATIONS (PARAMETER P00)
The LED503 controller can be configured in various ways depending on the
type of system. Various configurations can be obtained by configuring
parameter P00 (see the controller parameter configuration procedure).
001
> System pipes : 2
> Valve : no
> Electrical heater : no
> Speed : 3
> Summer/winter switching logic: local
002
> System pipes : 2
> Valve : no
> Electrical heater : no
> Speed : 3
> Summer/winter switching logic: remote
003
> System pipes : 2
> Valve : no
> Electrical heater : no
> Speed : 3
> Summer/winter switching logic: water
004
> System pipes : 2
> Valve : no
> Electrical heater : no
> Speed : 4
> Summer/winter switching logic: local
005
> System pipes : 2
> Valve : no
> Electrical heater : no
> Speed : 4
> Summer/winter switching logic: remote
006
> System pipes : 2
> Valve : no
> Electrical heater : no
> Speed : 4
> Summer/winter switching logic: water
007
> System pipes : 2
> Valve : no
> Electrical heater : yes
> Speed : 3
> Summer/winter switching logic: local
008
> System pipes : 2
> Valve : no
> Electrical heater : yes
> Speed : 3
> Summer/winter switching logic: remote
15
G B
FC66002953 - rev. 02