Wireless Lan Settings - Velleman CAMIP10N Bedienungsanleitung

 The Network Lamp or network LED indicates the network status of
the camera. To disable this LED, clear the checkbox Network
Lamp.
11.8

Wireless LAN Settings

1. Add and manage wireless networks
1. Click the Scan button to retrieve a list of available wireless LANs.
2. Click on a found network and enter the password if required.
3. When you want to use a wireless LAN, check the checkbox and
enter SSID, Channel and encryption method.
Depending on the selected encryption method, more data will
have to be provided.
Notes
 Some routers will automatically fill out the necessary data into the
fields.
 When entering data manually, check the wireless network settings
of your router to find more information on SSID, Channel,
encryption and authentication.
2. WPS (Wi-Fi Protected Set-up)
1. Please use a small round stick (e.g. toothpick) to press and hold
down the reset button for about 4 seconds. Now you can use
the WPS function.
2. Press the WPS button on your router within 60 seconds. The
WPS button is usually on the back or side of your router. On
some routers, you may need to log in to the web interface and
click on an on-screen button to activate the WPS feature. If you
are not sure where the WPS button is on your router, prease
refer to your Router‟s manual.
V. 02 – 22/02/2013
CAMIP10N
17 ©Velleman nv