Operation - Teesa TSA3521 Bedienungsanleitung

Owner's manual
Do not handle the device with wet hands.
• Never use the device if the device itself or its cord have been damaged. Do not attempt
to repair/disassemble this device yourself. In case of damage, contact with an authorized
service point for check-up/repair.
• Don't let excess cord hang over the edge of the table or worktop or touch hot surface.
• The appliance is constructed to process normal household quantities. Not for commercial use.
• Improper use of this device may lead to injuries and damages.
• Be careful while handling the blades, they are extremely sharp.
• Keep your fingers and kitchen utensils away from the moving blades / rotating whisk.
• Do not place any accessory of this device into microwave.
1. Before assembly, clean all the parts which will have contact with food. Be extremely
careful when cleaning the blades – they are sharp and can cause injury.
2. Mounting: Choose the attachment you want to use and follow the steps indicated below:
1. Blender: place the motor unit into the
blending stick holder and turn anti-
clockwise until it locks in place.
2. Whisk: place the motor unit into the
whisk holder and turn anti-clockwise
until it locks in place.
3. Plug the device into power mains socket.
Note: In case of using blender or whisk, insert the
attachment into a container with food to be processed.
4. Set the adjustable speed knob to desired setting
and press adjustable speed mode button OR
press Turbo mode button to start operation.
Note: user can freely change settings of the
adjustable speed knob during operation when
using adjustable speed mode button (top button).
5. Use the blender no longer than 1 minute at a
time. If within that period, the desired effect has
not been reached, stop operation and wait for
about 1 minute before using the device again.
Note: please regard 1 minute of operation and
1 minute of rest as a one operation cycle. After
continuous operating the device for 5 cycles (that
is 1 min. operation followed by 1 minute rest, 5 times in a row), the blender must be left for
cooling for about 30 minutes.
6. Unplug the device from power supply mains after operation.
Notes on usage:
• Don't use the appliance when not immersed into food.

OPERATION

13
EN