Specifications; Identification; Machine Dimensions - SEAL 54 Base Betriebsanleitung

3 SPECIFICATIONS

3.1

Identification

The machine identification label (example in The power supply must be able to provide the
rated power according to the electrical code requirements for the area of installation.
Consult your local electrician for the power supply requirements
.
Figure 4) is located at the bottom of the right-hand cabinet, on the rear side of the machine.
This label indicates the model (version) and the rated power of the machine.
CAUTION:
The power supply must be able to provide the rated power according to the electrical
code requirements for the area of installation. Consult your local electrician for the
power supply requirements
.
Figure 4: Machine identification label (example).
3.2

Machine dimensions

Uncrated:
Width
Height
Depth (excl. table)
Depth (incl. in-feed table)
Working height
Weight
Specifications
Metric American
190.5 cm
132.6 cm
47.7 cm
55.0 cm
90 cm
232 kg
75.0 in.
52.2 in.
18.8 in.
21.7 in.
35.4 in.
512 lbs
11