Pictograms; Transport; Assembling Instructions - Sima CAT 202 Gebrauchsanweisung

• The scarifier CAT models adjust the depth which you want to perform a specific operation as the following:
Descending the drum
adjustment wheel, start up the engine, lower the drum by turning the depth adjustment wheel or block the lifting
screw.
• The machine frame is constructed of quality steel to withstand the harsh and aggressive work to which it is
subjected.
• The machine frame is painted with epoxy - polyester which gives a high surface resistance and maintains the
structure protected from corrosion.
• The drum group is driven by the engine through pulley transmission and flexible belts, the transmission is
protected with a protection to prevent access to moving parts.
• The driving handlebar height can be adjusted by offering convenience and ease driving to the operator.
• The electric equipment in the electric motor mounted models that meet EU safety standards.
• The machine is equipped with rubber wheels to facilitate the work and travel.

2.1 PICTOGRAMS

Pictograms included in the machine entail the following:
READ
INSTRUCTIONS
MANUAL
USE SAFETY GLOVES

3. TRANSPORT

For short distances, the scarifier CAT 202 can be transported onto its own wheels.
When the machine must be lifted, use the a mechanist adecuate to the weight of the machine-. It will be then
easy to fix steel cables or chains. Its weight and dimensions make it easy to transport in small vehicles.
WARNING: use highly- resistant cables or chains (bear in mind the weight of the machine and see the metal
label of the machine).
When you put down the machine, do it gently and avoid any strong bumps on the wheels that could damage
other components.

4. ASSEMBLING INSTRUCTIONS

The different versions of scarifier CAT 202 are supplied and single-packed into reinforced cardboard boxes
onto a wooden pallet.
With the machine, the operator will find the following components:
- Body of the machine bolted to the pallet, including a drum ready to work.
- Top of the handlebars ready for placement.
- Bottom spindle prepared for placement.
- Bag containing different tools for maintenance and an instruction manual of the machine with its security and an
instruction book itself for petrol engine. Electrically powered versions are supplied with a intake main supply.
the working position, unlock the spindle, lifting up the drum by turning the depth
USE HELMET AND EYE AND EAR
DEFENDERS
USE SAFETY FOOTWEAR
6
ENGLISH