Selecting Preset Stations; Clearing Preset Assignments; Setting The Tuner Broadcast Outputs - Tascam CD-400U DAB Bedienungsanleitung

Selecting preset stations

0 When in preset mode, turn the main unit MULTI JOG dial or
use the remote control k and j buttons to select a preset
station.
0 You can also use the main unit or remote control number but-
tons to directly enter a preset number, and press the ENTER
button to select that station.

Clearing preset assignments

1.
Select the current source for the presets to be cleared (FM).
(see "Selecting the playback source" on page 22)
2.
Press and hold the main unit or remote control CLEAR but-
ton.
The following message will appear on the Home Screen.
FM Clear all
Presets OK?
Before clearing FM station presets
DAB Clear all
Presets OK?
Before clearing DAB station presets
3.
Press the main unit MULTI JOG dial or remote control ENTER
button.
After all preset assignments for the current source have been
cleared, the Home Screen reopens.
NOTE
Press the main unit or remote control CLEAR button to cancel
the operation and return to the Home Screen.
7 – Listening to FM radio

Setting the tuner broadcast outputs

You can set whether tuner broadcast signals are output from the
TUNER OUT jacks only or from all the main unit jacks (TUNER
OUT, ANALOG OUT and PHONES jacks).
1.
Select the Tuner Out Sel. item on the Menu screen to open
the Tuner Out Sel. screen. (see "Menu operation proce-
dures" on page 18)
Tuner Out Sel.
< ALL
2.
Set the outputs for sounds from the tuner.
Option Meaning
Tuner broadcasts sounds are output
Tuner Out
only from the TUNER OUT jacks.
Tuner broadcast signals are output
from all the main unit jacks (TUNER
ALL (default)
OUT, ANALOG OUT and PHONES
jacks).
3.
Confirm the setting and return to the Menu screen.
NOTE
The tuner audio output setting is retained even when the unit
is turned off.
TASCAM CD-400U DAB
>
35