Control Panel - Dirna miniCOOL COMPACT 3.0 Benutzerhandbuch

EN

Control Panel

5
4
1.- On/off: Switching the unit On - Off and mode selection F4/ F0/ F1/ F2/ F6
2.- Temperature selector (15/ 27 ºC - 59/80º F) Remote control programmation, Farenheit
degrees and Air Speed: Ambient temperature control and blower speed (between 1st and 5th
speed) manual mode only.
3.- Display: Screen showing the function selected and the status of the equipment.
4.- Led On - indicates intermediate power
5.- Led On - indicates maximum power P0, p4
• On connection, the equipment checks the leds and
Special display messages
"Technical Control" Battery low (will emit bips during a brief period of time and the kit will
:
turn off)
Poor contact of the sensor recirculation wires or lead anti-recirculation broken down.
EO:
Poor contact of the anti-ice sensor or lead anti-ice broken down.
E6:
Turning the Equipment On
To turn the Minicool Compact 3.0 N&D unit on, press the On/ Off key
start up on the Function (Automatic Function).
F4
To change the function, hold down the On/ Off key
release the key on obtaining the desired function.
ºC
3
ºF
TEMP
(please see failure Diagnosis)
2
f0,f4
-2 appears on the screen and turns off.
:
. The different functions will be displayed,
8
ON/OFF
1
. The unit will always