Canon DR-5080C Bedienungsanleitung Seite 88

5
Wipe the rollers with a firmly wrung cloth moistened with water or
mild detergent.
Rollers are located at the positions indicated in the figure below. Turn
these rollers in the direction of the arrows as you wipe them clean.
HINT
Roller
• If a roller becomes loose (Figure A), re-attach it as shown in Figure B.
• Before you return the upper unit to its original position, be sure to lower the lever
on the feed unit (Figure B). If the document is scanned with the lever at the up
position, a paper feed error will occur.
6
Use a clean, dry, soft cloth to wipe off any water from the rollers.
A
Rollers
1. Fit into the deeper
3. Lower the lever.
2. Press this part.
B
5.1 Daily Cleaning
of the two grooves.
85