2.2 Installation And Connection; Carrying - Canon DR-5080C Bedienungsanleitung

Installation and Connection
This section describes scanner installation and connection.
For details on the scanner installation location, see "About the Installation Location" in
the Safety Precautions (P.8).
MEMO

Carrying

When you move the DR-5020/5080C, hold it firmly with both hands as shown in
the figure below and carry it carefully. If you carry it without holding its handles,
you may drop it, nip your fingers and cause unexpected injuries. The scanner
weights approximately 20 kg (44.2 lb).
Before you move the scanner, always turn the power switch OFF and disconnect the
power cord from the power outlet. Also, disconnect the SCSI cable from the connector.
WARNING
Moving the scanner with the power still ON or the SCSI cable still connected might
result in electrical shock.

2.2 Installation and Connection

23