Operation; Overview - Sony LKRI-005 Bedienungsanleitung

Operation

Overview

Signal
1024 × 768 (VESA)
1280 × 720 (CEA/EIA-861B)
1280 × 720 (CEA/EIA-861B)
1280 × 960 (VESA)
1280 × 1024 (VESA)
1400 × 1050 (VESA)
1600 × 1200 (VESA)
1920 × 1080 (CEA/EIA-861B)
1920 × 1080 (CEA/EIA-861B)
1920 × 1080 (CEA/EIA-861B)
1920 × 1200 (VESA 2.30MA-R)
a)
2048 × 1080
a)
2048 × 1080
a)
2048 × 1080
18
Operation
The HDCP DVI Board LKRI-005 is an optional input board designed
for installing into the SRX-series projectors. You can input DVI digital
signals (progressive signals only) by connecting this board with a
computer.
HDCP (High-bandwidth Digital Content Protection) DVI-D signal can
also be input when the input signal with specified resolution is input
from this board.
This board only complies with the signals (progressive signals only)
below.
Notes
• This board is incompatible with the SR projectors SRX-R110/R105
and SRX-S110/S105.
• This board is incompatible with 480P and interlace signals. When no
picture is output even though HDCP compatible signals have been
input, check and change the setting of the output device to other than
480P or interlace signals.
Frame rate (Hz)
60
50
60
60
60
60
60
24
50
60
60
24
48
60
Dots clock (MHz) HDCP
compatible
65.00 —
74.25
a
74.25
a
108.00 —
108.00 —
121.75 —
162.00 —
74.25
a
148.50
a
148.50
a
154.00 —
74.25 —
148.50 —
148.50 —