Setup Steps - LaCie d2 Quadra Schnellinstallationsanleitung

Setup Steps

1. Connect the power supply.
2. Connect the USB 3.0, FireWire 800
or eSATA cable to your computer and
to the drive.
NOTE: If your computer does not have
a USB 3.0 port, you can connect the
included USB 3.0 cable to a USB 2.0 port.
In this case, file transfers will be limited
to USB 2.0 speeds. To take advantage
of SuperSpeed USB 3.0 transfer rates,
you can add a USB 3.0 PCI-Express
card (for desktop computer) or a USB
3.0 ExpressCard/34 (for laptop). For
more information, visit www.lacie.com/
accessories.
3. Turn on the drive by moving the power
switch to On. The drive will mount in My
Computer (Windows XP), Computer (Vista
or Windows 7) or on your desktop (Mac).
Power Switch