Setup Steps - LaCie d2 Network Schnellstartanleitung

Setup Steps

1. Connect the power supply.
2. Connect the Ethernet cable to the d2 Network
and to your network through an Ethernet outlet
or directly to a router, switch or hub.
3. Turn on the d2 Network by moving the power
switch on the back to the ON position.
NOTE: Please allow approximately 3 minutes for the d2
Network to start up and become available on the network
(the front LED will stop blinking).
4. Install LaCie Network Assistant on your
computer from the LaCie Utilities CD-ROM.
Windows users, click the
Network Assistant icon in the system tray.
Mac users, click the
Network Assistant icon in the menu bar.
Linux users, click the
Network Assistant icon in the task bar.
3
2
1