Setup Steps - LaCie d2 Quadra Schnellinstallationsanleitung

Setup Steps

1. Connect the power supply.
2. Connect the USB, FireWire or eSATA cable
to your computer and to the drive.
NOTE: Do not connect more than one
interface cable simultaneously.
3. Turn on the drive by moving the power
switch to On or Auto (drive powers on/
hibernates automatically). The drive will
mount in My Computer (Windows) or on
your desktop (Mac).
NOTE: This product is pre-formatted in
HFS+, so Windows users will need to
reformat the disk before using the d2
Quadra Enterprise. Refer to the detailed
User Manual located on the LaCie
CD-ROM for formatting information.
4. Install the LaCie Desktop Manager software
from the CD-ROM in order to configure
encryption and the Shortcut button.
CAUTION: The encryption process requires
the drive to be reformatted, which will
erase data stored on the d2 Quadra.
Back up data before enabling encryption.
Power
Switch