sylvac UL 4 Bedienungsanleitung Seite 9

5.2 Bluetooth ® specification
Radio frequency
Robustness
Latency (from not connected state to
send data)
Range
Autonomy with CR2477
Other specifications on the manufacturer's website
6. Insert tolerance limits
In order to introduce or modify the tolerance limits, it is necessary to select tol →
On , followed by a short press on
Note :
- In case of measuring internal ratings, you can cross the indicators by reversing
the order of entering the tolerance intervals (upper interval < lower interval)
- It is possible to introduce different tolerance limits on REF1 and REF2.
- It is also possible to display the tolerance limits when the instrument is working
in MIN, MAX or DELTA (TIR) mode
Continuous : up to 8 months (Always connected with 4 values /sec)
Saver : up to 21 months (The instrument sends value only when the position has changed)
Blind/Push : up to 24 months (Value is sent from the instrument (button) or requested from
the computer)
MODE
....... Input the lower tolerance limit (e.g. +0019.90 for 20-0.1mm)
.......Input the upper tolerance limit (e.g. +0020.10 for 20+0.1mm)
next digit
9
2.4Ghz
FHSS
<6ms
Open space : up to 15m
Industrial environment : 1-5m
0...9
SET MODE
save the tolerance
E