Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IT-2
3.4 Menu
3.4.1 Struttura dei menu
Di seguito è illustrata la struttura dei menu della bilancia farmaceutica. Nelle sezioni 3.4.2 e 3.4.3 del
manuale di istruzioni sono contenute le informazioni relative alla navigazione nei menu e alla modifica delle
impostazioni.
CALIBRATION (3.7.1)
SETUP (3.7.3)
InCAL
LEGAL TRADE
SPAN
AUTO TARE
LINEARITY
AUTO OFF
CAL TEST
END SETUP
CAL NOW
CAL ADJ
END CAL
PRINT-1 (3.7.7)
UNIT (3.7.6)
OUTPUT
MILLIGRAM
AUTO PRINT
GRAM
CONTENT
KILOGRAM
LAYOUT
OUNCE
LIST
POUND
EndPRINT-1
CARAT
END UNIT
RS232-1 (3.7.8)
GLP DATA (3.7.9)
BAUD
USER ID
PARITY
PROJECT ID
HANDSHAKE
TIME
EndRS232-1
DATE
EndGLPDATA
END (3.7.13)
LOCKOUT (3.7.12)
CALIBRATE
SETUP
READOUT
MODE
UNIT
PRINT-1
END
RS232-1
GLP DATA
GLP PRINT
RESET
LOCK SET
ENDLOCKOUT
Adventurer Pro farmaceutica
READOUT (3.7.4)
AUTO ZERO
FILTER
GROSS IND
END READ
MODE (3.7.5)
WEIGH
COUNT
FORMULA
END MODE
GLP PRINT (3.7.10)
TIME
BALANCE ID
USER ID
PROJECT ID
DIFFERENCE
NAME
End GLPPRT
RESET (3.7.11)
SETUP
READOUT
MODE
UNIT
PRINT-1
RS232-1
GLP DATA
GLP PRINT
LOCKOUT
GLOBAL
END RESET
Adventurer Pro Pharmacy
3.5 Application Modes
The Pharmacy models have three modes weighing, parts counting and formulation. Weighing and Parts
counting are covered in the Instruction Manual, sections 3.5.1 and 3.5.2. Note: All three modes are enabled at
the factory; see section 3.7.4 in the Instruction Manual to disable unwanted modes.
3.5.8 Formulation
Formulation Mode allows the user to weigh in different components (max 99) up to the capacity of the
balance. The user can also print out the total weight and the individual weights of the components.
1)
To start a new formulation, Press and hold Mode until FORMULA is displayed in the secondary
display.
2)
Place container on the pan and press Tare.
3)
Add component 1, its weight is displayed on the primary display. Press Function to store
component 1 weight to memory and to print component 1 data. The scale also performs an Auto
Tare function and is ready for component 2.
The secondary display momentarily shows the total weight of the components including its
weighing unit then the display description, COMP TOTAL
4)
Add component 2. Press Function to store component 2 weight to memory and print component 2
data. The scale then performs an Auto Tare function and is ready for component 3.
5)
Continue adding components pressing Function to store the weight of the individual components.
Components can be added to the formula until:
The scale capacity is reached.
The number of components is 99 (primary display shows dOnE).
A new formulation is started, step 1.
6)
After the last component data is stored and printed, press and hold Mode until FORMULA is
displayed. The balance prints component total and displays current NET weight on primary display.
7)
If filler is now added, pressing Print will print the total net weight of the formulation and filler.
Sample Print Out
∧∧∧∧∧∧∧∧∧∧∧∧∧∧∧∧∧∧
01/01/09 00:13:09 AM
Bal ID: 1234567890
USER ID:
PROJ ID:
Name___________________
50.02 g T
Comp 1:
20.01 g
Comp 2:
49.99 g
Comp 3:
100.01 g
Comp 4:
99.01 g
Comp 5:
300.03 g
Comp 6:
1000.04 g
Comp 7:
1000.10 g
Comp 8:
1000.00 g
Comp Total: 3569.20 g
Total:
4000.00 g N
∨∨∨∨∨∨∨∨∨∨∨∨∨∨∨∨∨∨
Print key pressed after filler is added.
EN-3
Werbung
Inhaltsverzeichnis
