Avaya 3641 Bedienungsanleitung Seite 7

Basic Handset Operation Summary
The handset's Battery Pack must be fully charged before its first use. See
the User Guide for full information. Place the handset into the charger for a
minimum of two hours.
If you want to
Remove the
Battery Pack
Replace the
Battery Pack
Turn handset on
Turn handset off
Unlock the keypad
Lock the keypad
Make an internal
call
Make an external
call
Select a line
Dial a number
Answer a call
Then
Press down on the latch on the Battery Pack at the back
of the handset and pull the Battery Pack towards you. The
Battery Pack releases outward.
Slide the lip of the Battery Pack into the bottom of the cavity.
Push the top of the Battery Pack until it snaps into place.
You should not have to force it into the handset.
Press and hold the END key until two chirps sound.
Press and hold the END key. One chirp will sound. If you are
in a call, hang up first, then turn off the handset.
Press the Unlk softkey, then #, to unlock the keypad.
Press the Cfg softkey then NavOK, to manually lock the
keypad.
Press the START key, wait for a dial tone, then dial the
extension.
Press the START key, wait for a dial tone, then dial the
number just as you would from your desk phone.
If multiple lines are available, your handset will default
to line 1. If a different line is desired, press LINE and the
number key corresponding to the desired line. You will hear
a dial tone.
Once you hear a dial tone, press the number keys to dial
the number.
To answer a call, press the START key and hold the earpiece
to your ear. You may also activate the speakerphone function
or use a headset.
EN