Werbung
17
Technical Information
Use
Use
General
Make all vacuum manifold and electrical connections and refer
to TwisTorr pump instruction manual before to operating the
TwisTorr controller.
WARNING!
To avoid injury to personnel and damage to the equipment, if the pump is laying
on a table make sure it is steady. Never operate the TwisTorr pump if the pump
inlet is not connected to the system or blanked off.
The input signal P1 connector should be left in position including the shipping
NOTE
links if no external connections are made. The forepump and the TwisTorr pump
can be switched on at the same time.
252/297
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (A)
Werbung
Kapitel
