Werbung
All the logic output from the controller must be connected at P2
mating connector. The following table describes the signals
available on the connector.
The following figure shows a typical logic output connection
(relay coil) but any other device may be connected e.g. a LED, a
computer, etc., and the related simplified circuit of the
controller.
Figure 12
Figure 13
TwisTorr 84 FS AG Rack Controller User Manual / 87-901-037-01 (A)
> 1 K
Digital Output Connection Example
1
2
Analog Output Connection Example
Technical Information
Controller Connection
J 1
+24 V
17
217/297
Werbung
Kapitel
