Display - Pioneer HTP-076 Bedienungsanleitung

Display

1. Lights in the following conditions.
: Connected by BLUETOOTH.
HDMI: HDMI signals are input and the HDMI input is selected.
DIGITAL: Digital signals are input and the digital input is selected.
2. Lights according to the type of input digital audio signal and the listening
mode.
3. Lights in the following conditions.
RDS (European, Australian and Asian models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
STEREO: Receiving FM stereo.
p81)
SLEEP: Sleep timer is set. (
AUTO STBY: Auto Standby is set. (
4. Displays the audio output destination.
A: Outputs audio only to the main room (ZONE A).
B: Outputs audio only to the separate room (ZONE B).
AB: Outputs audio to both the main room (ZONE A) and separate room (ZONE B).
5. Lights when headphones are connected.
6. Blinks when muting is on.
7. Displays various information of the input signals.
8. Lights when adjusting the volume.
9. Speaker/Channel display: Displays the output channel that corresponds to the
selected listening mode.
Contents
1 2
p81)
Connections
≫
3
7
10
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
4 5 6
8 9
≫