Edirol PCR-30 Bedienungsanleitung Seite 16

Installing & Setting Up the Driver (Windows)
13
The Found New Hardware Wizard will appear.
Make sure that the screen indicates "EDIROL PCR", select"Install from a list
or specific location (Advanced)", and click [Next].
fig.2-7
14
The screen will indicate "Please
choose your search and
installation options".
Select "Don't search. I will
choose the driver to install",
and click [Next].
15
Make sure that the "Model" field indicates "EDIROL PCR", and click
[Next]. Driver installation will begin.
If the "What action do you want Windows to take?" setting was not set to "Ignore",
a "Hardware Installation" dialog box will appear.
If "What action do you want Windows to take?" is set to "Warn"
1.
Click [Continue Anyway].
2.
Continue the installation.
If "What action do you want Windows to take?" is set to "Block"
1.
Click [OK].
2.
When the "Found New Hardware Wizard" appears, click [Finish].
3.
Perform the installation as described in the "Troubleshooting" section on Device Manager
shows "?", "!", or "USB Composite Device" (p. 172).
fig.2-9_30
16
The Insert Disk dialog box will appear.
Click [OK].
17
The Files Needed dialog box will appear.
Input the following into the "Copy files from" field, and click [OK].
D:\Driver\USB_XP2K
* The drive name "D:" may be different for your system. Specify the drive name of your
CD-ROM drive.
16
The Insert Disk dialog
may not appear. In that
case, proceed to step 17.