Setting Method D; Setting Method E; Setting Method F - Edirol PCR-30 Bedienungsanleitung

Edit mode (EDIT)

Setting method D

Perform steps 1–3.
4
Use the [DEC][INC] buttons or the [0] or [1] keys to specify the USB DRIVER MODE.
0
1
* FPT = Fast Processing Technology for MIDI Transmission:
Effective use is made of the USB bandwidth according to the amount of MIDI data to be
transmitted, ensuring that MIDI data processing will always occur optimally.
5
Press the [ENTER] button.

Setting method E

Perform steps 1–3.
4
Use the [DEC][INC] buttons or the [0] or [1] keys to specify the GM2/LAST ACCESS
MEMORY setting.
0
1
5
Press the [ENTER] button.

Setting method F

Perform steps 1–3.
4
The display will indicate "RST".
5
Press the [ENTER] button.
6
The display will blink "YES".
7
Press the [ENTER] button.
156
FPT technology is used to perform high-speed
Original driver MIDI transfer. Normally, we recommend that
you use this mode.
Select this if you are using the standard MIDI
Generic driver
driver provided by your operating system.
When the PCR starts up, memory number 0 (GM2) will
GM2 MEMORY be loaded into current memory (p. 148) regardless of the
state in which the power was turned off.
Upon power-up, the PCR-30/50/80 will recall the
LAST ACCESS
memory that was last recalled or saved into current
MEMORY
memory (p. 148) .