When Using A Usb Connection - Edirol PCR-30 Bedienungsanleitung

When using a USB connection

fig.connect-usb
EV-5 (sold separately)
V-LINK OFF
PC
MIDI OUT DEVICE
EDIROL PCR MIDI OUT
EDIROL PCR
MIDI IN DEVICE
EDIROL PCR MIDI IN
EDIROL PCR 1
EDIROL PCR 2
V-LINK ON
PC
MIDI OUT DEVICE
EDIROL PCR MIDI OUT
EDIROL PCR
MIDI IN DEVICE
EDIROL PCR MIDI IN
EDIROL PCR 1
EDIROL PCR 2
* If V-LINK is ON, PCR 1 and PCR 2 messages will be sent both to USB and to the MIDI connector.
* For an explanation of the items in the diagram, refer to "About the ports when using a USB
connection" (p. 159).
USB cable
DP-2 (sold separately)
It is not necessary to connect the
AC adaptor if you are using a USB
connection. However, with some
computers, the PCR-30/50 may
not operate when powered from
the USB bus. In this case, set the
power switch to the DC position
and connect the AC adaptor.
PCR-30/50/80
USB
BULK RECEPTION
PORT 1
PORT 2 /
BULK TRANSMISSION
PCR-30/50/80
USB
BULK
RECEPTION
PORT 1
PORT 2 /
BULK TRANSMISSION
Connection and MIDI data flow
AC adaptor
MIDI OUT
MIDI IN
MIDI OUT
MIDI IN
115