Omni - Edirol PCR-30 Bedienungsanleitung

OMNI

If you turn the Omni setting ON, all messages will be transmitted on the current channel (p. 118)
regardless of the channel that is specified for each controller.
Also, all messages will be transmitted to the "KEYBOARD PORT SET" (p. 154) regardless of
the port that is specified for each controller.
fig.edt
1
Press the [EDIT] button.
The display will indicate "EDT".
2
Press the [OMNI] key.
fig.omn
The display will blink "OMN".
3
Confirm what's indicated and press the [ENTER] button.
4
The display will show the current setting.
0
1
5
Use the [DEC] [INC] buttons or the [0] [1] keys to select the mode.
6
Press the [ENTER] button.
Messages will be transmitted on the channel and port
OMNI OFF
specified for each controller.
Messages will be transmitted on the current channel
OMNI ON from the Keyboard Port, regardless of the channel
and port specified for each controller.
Edit mode (EDIT)
149