Rear Panel; Usb Connector - Edirol PCR-30 Bedienungsanleitung

Names of things and what they do

Rear Panel

fig.rear_50
20
20. Security Slot (
A commercially available security lock can be attached here.
http://www.kensington.com/
21. AC adaptor jack
Connect the include AC adaptor to this jack. Insert the plug firmly so it won't get unplugged
accidentally.
22. Power switch
DC
OFF
USB *1
*1 Bus power (USB)
BUS power can be used when the PCR-30/50/80 is connected to your computer via a USB
cable. In this case, the power will be supplied from your computer via the USB cable. To use
the PCR-30/50/80 with bus power, set the power switch to USB.
* For some computers, the PCR-30/50/80 may not operate if bus power is used. In this case, use the
included AC adaptor.

23. USB connector

Use this when connecting the PCR-30/50/80 to your computer via a USB cable.
24. MIDI IN/OUT connectors
These can be connected to the MIDI connectors of other MIDI devices to transmit and receive
MIDI messages.
25. Controller [P1] and [P2]
You can connect the appropriate type of pedals to these jacks and use them as controllers.
HOLD
EXPRESSION
You can also assign MIDI messages to these controllers as desired.
12
21 22 23
) [PCR-30/50]
Power on using the AC adaptor
Power is off
Power on using a USB cable (when not using the AC adaptor)
Connect a pedal switch to this jack and use it as a Hold pedal.
Connect an expression pedal to this jack and use it to control tone
or volume in real time.
24
25