Program Change Mode (Program Change) - Edirol PCR-30 Bedienungsanleitung

Program Change mode (PROGRAM CHANGE)

This mode lets you transmit a program change message on the current channel.
fig.PC-1_80
3
1
Press the [PROGRAM CHANGE] button.
The [PROGRAM CHANGE] button will light. The display will indicate the program change that
was transmitted most recently.
* The [HEX] or [DECIMAL] button will also light according to the input mode (p. 158).
2
Use the [DEC][INC] buttons or the [0]–[F] keys of the keyboard to specify the
program change you want to transmit.
DEC
INC
0–F
3
Press the [ENTER] button.
The setting will be cancelled if you press another button instead of the [ENTER] button.
The program change has now been transmitted.
2
1
Change the current value by -1
Change the current value by +1
The input value
HEX...00–7F
DECIMAL...1–128
Basic operation
119