bloom Fresco contemporary Anleitung Seite 20

(c8-c0) Mini tray assembly
– (#03) Attach mini tray arms under the safety
bar. Pull trigger under the mini tray whilst
rotating the tray downwards.
– Lock the mini tray into position by pressing the
arms of the mini tray up towards the safety
bar. You will hear an audible click.
– To remove the mini tray, reverse the order of
assembly steps.
– The mini tray is dishwasher safe.
(c-c) Food tray assembly
– (#04) Squeeze the left and right trigger located
under food tray simultaneously, whilst sliding
the food tray onto the mini tray, then release
triggers at your desired setting. You will hear
an audible click. Check the food tray is locked
in place by attempting to pull it free of the
highchair.
– The food tray can lock in three positions.
– To adjust the tray, pull the left and right side
triggers located under the tray simultaneously
whilst sliding the tray forwards or backwards.
Release triggers at the desired setting. You
will hear an audible click. Check the food tray
is locked in place by attempting to pull it free
of the highchair.
– To remove the food tray, reverse the order of
assembly steps.
– The food tray is dishwasher safe.
NOTE: Always check the tray is securely locked
in place by attempting to pull it free of the
highchair.
(c) Seat unit height
Adjust the height of the highchair to your desired
setting by following the height adjustment
section of this instruction guide.
(c4-c5) Seat unit recline
– In highchair mode the seat unit can be
adjusted to three different recline positions.
– To adjust the seat unit between the upright
position to the first recline position, depress
the handle on the rear of the seat unit
upwards whilst rotating the seat upwards
or downwards to the desired position, then
release the handle. You will hear an audible
click. Check the seat unit is locked in position
by moving it.
– The food tray, mini tray, and safety bar can be
applied on the highchair for the upright and
first recline position.
– To adjust the seat unit to the lie-back position,
the safety bar, mini tray and food tray must be
removed. Pull the handle on the rear of the
seat unit upwards whilst reclining the seat to
the lowest lie-back position, then release the
handle. You will hear an audible click. Check
the seat unit is locked in position by moving it.
WARNING: Highchair mode is designed for
children 6 months to 6 months only. Always
use the safety harness.
WARNING: Always be sure your child is clear of
moving parts before making any adjustments.
NOTE: In lie-back position the safety bar, mini
tray and food tray must be removed.
eng
7