General Information; Maintenance And Repair - Maclaren major elite Handbuch

GENERAL INFORMATION

MAINTENANCE AND REPAIR

• Regularly check all rivets and connecting
devices for tightness and security. Inspect
all brakes, wheels and tyres and replace
or repair if necessary. Check all safety
devices for correct operation, in particular
the primary and secondary locks. These
should be free to move at all times. Never
continue to use a product that is not
structurally sound.
• We recommend servicing every 12 months.
• If wheels squeak, lubricate sparingly with
silicone coating.
• Do NOT use oil or grease based products,
as this will attract dirt, which will clog the
movement.
• Only Maclaren replacement parts should
be used. It may be unsafe to use parts not
supplied by Maclaren.
• Accessories which are not approved by
the manufacturer shall not be used.
CLEANING
• Clean frame with a damp cloth and a mild
detergent, do not use abrasives and dry
thoroughly.
• If the chassis parts have been exposed to
salt water we recommend that they be
rinsed down with fresh (tap) water as soon as
possible afterwards.
• The hood may be sponged lightly using a
damp cloth and a mild detergent.
• The seat cover may be washed – see care
labels for details and dry thoroughly before
reuse.
• Do not fold or store the product while wet
and never store in a damp environment as this
can cause mildew to form.