Index
Page
Description of the appliance
Instructions for use
Cleaning and maintenance
Problem solving
Sizes and specifications
Accessories supplied
Installation
Active charcoal filters
Description of the appliance
A
Electronic programmer control box
with buttons to control speed, light and
power in use indicators.
B
Metal filters.
C
Lamps - 20 W (G-4).
D, E
Vertically adjustable tubecovers.
Instructions for use
You may control the kitchen hood by
operating the controls as shown in the
diagram.
11
11
12
12
12
13
13
13
Switch on the extractor fan a few minutes
before you start to cook in order to ensure that
a steady air flow has been established before
fumes appear.
Allow the extractor fan to run for several
minutes after you have finished cooking
(between 3 to 5 minutes) in order to expel all
the grease from the outlet duct. This prevents
the return of grease, smoke and smells.
Proceed as follows:
1.- Choose the required speed.
2.- Press "timer". The light will begin to flash.
3.- Select the intake time by pressing the
corresponding button (see figure).
4.- Once the required time has been selected,
press "timer" again to memorise the program.
During the programmed time you can change
fan speed except to suction intensive.
The intensive speed can only be selected
manually and will change to speed 2 after
approximately 10 minutes.
Programming timer
11