BBraun Aesculap Acculan 3Ti Gebrauchsanweisung Seite 12

Aesculap ® Acculan 3Ti
Acculan 3Ti small drill GA671
►
Screw Kirschner wire protection sleeve 15 into
adapter 17, see Fig. 8.
Fig. 8
Coupling
►
Push the attachment onto the small drill 6 , until it
you hear it engage, see Fig. 9.
Fig. 9
10
17 15
6
Uncoupling
►
Turn rotating sleeve 5 in the direction of the arrow
(clockwise when viewed from the rear end of small
drill 6), see Fig. 10.
Fig. 10
►
Remove the attachment from small drill 6.
Protection against inadvertent activation
The rotational speed control button can be locked to
prevent inadvertent activation of the small drill during
a tool change.
►
To lock rotational speed control button 8: Turn
safety catch 9 to its OFF position, see Fig. 11.
Rotational speed control button 8 is locked and
small drill 6 can not be operated.
5
6