Danfoss FH-CWP Gebrauchsanweisung Seite 11

Instruction FH-CWP Thermostat
Setting the timing ON/OFF
• Press
flashes in the display.
• Use
• Press
• Use
• Press
flashes in the display.
• Use
• Press
• Use
Setting and changing the desired Room
Temperature
• Press
thermostat is ON) to change the desired room
temperature value,
display.
• When releasing the
returns to showing the actual room temperature
.
Produced by Danfoss Floor Heating Hydronics 05.2011
Fig. 1, and TIMER ON and hour
Fig. 1 to select the hour.
Fig. 1 again, minutes will flash.
Fig. 1 to select the minutes.
and TIMER OFF and hour
Fig. 1,
Fig. 1 to select the hour.
Fig. 1 again, minutes will flash.
Fig. 1 to select the minutes.
or Fig. 1 anytime (whenever the
will be shown in the
or Fig. 1 the display
11
VI.CU.C2.2D