Technical Specifications - Danfoss FH-CWP Gebrauchsanweisung

11. Technical Specifications

Feature
Approval
Colour
Dimensions
Adjustment mode
Fault indication/
failure mode
Frost protection
Ambient
temperature
Precision
Hysteresis
IP class
18
VI.CU.C2.2D
Instruction FH-CWP Thermostat
Description
CE Marking, EN 60730
White, RAL 9016
86 x 99 x 19mm
Push buttons
If room sensor failure, E1
will be displayed. If floor
sensor failor, E2 will be
displayed. In any case,
thermostat will turn off all
output of relays.
Yes, if enabled:
< 5 °C heating on
> 7 °C heating off
- 10 °C – 60 °C
±1 °C
1 °C, symmetrical around
the setpoint temperature
30
Produced by Danfoss Floor Heating Hydronics 05.2011