Klarfit 10022301 Handbuch Seite 14

Step 7:
Attach Left Pedal (5L) and Right pedal (5R) to
appropriate Crank Arm (6). The right Pedal is
on the right hand side of cycle as you sit on it.
Note that the right pedal should be threaded
on clockwise and the left pedal on counter-
clockwise
Check all bolts and nut are tightened
Before using the machine.
Operation
Auto on/off
Auto as long as the wheel is in motion, the monitor is in action, and auto to show all functions. If
there is no moving within 4 minutes, monitor will turn off automatically, and keep the values of TIME/
DISTANCE/CALORIES/ODOMETER, when moving again, the values will add up. If press any key in 2
second, all the values will be back to zero, except ODOMETER.
Auto scan
Press the button until the arrow points to SCAN, monitor will rotate through all 6 scan able functions,
Riding Time, Speed, Distance, Calorie, Odometer, Pulse, Each display will be held for 6 seconds.
SPEED
Display the current speed, speed is 0.0 up to 999.9km/h or ml/h.
DISTANCE
Accumulates total distance from 0.0 up to 999.9km or ml.
TIME
Accumulates total working time from 00:00 up to 99:59.
CALORIE
Accumulates calories consume during exercise from 0 up to 999.9cal.
ODOMETER
Press the button until display ODO, total distance from 0 up to 9999km or ml. Monitor will display
the total accumulated distance.
PULSE
Press the button until display ,monitor will display your current heart rate in beats percent minu-
te. RESET Pressing the button for more than 2 second will reset all functional values to zero except
odometer.
Note: If the computer displays abnormally, please re-install the battery and try again.
14