Curve Washer; Flat Washer; Allen Bolt - Klarfit 10022301 Handbuch

Step 4:
Attach the Seat (61) to the Back cushion
tube (59), using 4x Flat Washer (57)and
4x Allen bolt(38). Attach the Back cushion
(60) to the Back cushion tube (59), using
4x Flat Washer (57)and 4x Allen bolt(38) .
Step 5:
Take the Front Post (26) and join the Middle Computer Wire
(22) with Lower Computer Wire(40). Pull Lower Tension Cable
(67) from Front post (26) and out from the hole on the up-
side, then connect the Lower Tension Cable (67) with Tension
Cable(31),like the arrow direction. Then fasten the Tension Knob
by 1XCurve Washer (24) & Screw (25).
Pull the Cover for front post (28),then insert the Front Post (26)
into Front Main Frame (27), tighten with 4X Allen Bolt (23) and
4X Curve Washer (13).
Slide Computer (29) into the Front
post (26).tighten with 4X Screw
(30),then insert the Middle Computer
Wire (22) into the pulse hole.
Note: Please turn the resistance ten-
sion to level 8 before assembly.
12