Some Important Facts About Wine; Power Supply; Installing Your Wine Cabinet - ArteVino OXGIT230NVD Gebrauchsanweisung

Some important facts about wine

Your ARTEVINO wine cabinet has been designed to guarantee optimal storage and/or serving conditions
for your wine.
Wine is a complex product. It develops very slowly and requires specific conditions in order to reach its
full potential.
All wines are stored at the same temperature. Only their serving temperatures differ.
This being the case, just like the natural cellars of wine producers, it is not so much the absolute value of
the storage temperature that is important but its consistency. In other words, whatever temperature your
cabinet is set at (between 10 and 14°C), your wine will be stored in ideal conditions provided that this
temperature does not fluctuate.
IN ANY EVENT, If YOU NOTICE A HUMIDITY OR TEMPERATURE fAULT INSIDE YOUR WINE
CABINET, BE AWARE THAT ONLY PROLONGED EXPOSURE TO ABNORMAL CONDITIONS
IS HARMfUL TO YOUR WINES.

Power supply

For your personal safety, the wine cabinet must be correctly earthed.
Ensure that the socket is correctly earthed and that your installation is protected by a circuit breaker
(30 mA*)
*Not applicable to some countries.
All work must be carried out by a qualified electrician.

Installing your wine cabinet

• When unpacking your cabinet, check that it is not damaged (signs of impact, buckling, marks).
• Carefully remove any packaging adhesives or protective elements from your wine cabinet.
• Open the door and check that the various elements are intact.
• Arrange the electric power lead so that it does not come into contact with any
of the cabinet's components.
• Take the lead (which you will find in your cabinet's "accessories" bag) and plug it
into the connector, located at the back of the cabinet, on the bottom left-hand side
(see diagram below).
• Install the stop at the back of the cabinet (see diagram).
This allows a space of 7 cm to be maintained between the wall and the rear of the
6