Commissioning And Temperature Setting - ArteVino OXGIT230NVD Gebrauchsanweisung

Commissioning and temperature setting

Commissioning
After waiting 48 hours, plug in your wine cabinet, having checked that your socket is correctly
supplied with power
(presence of correct sized fuses, circuit breaker in working order. If need be, plug in another electrical
appliance to check the power supply).
Temperature setting
Description of the control panel
•
•
•
•
Commissioning the control panel
By default, the control is in the "on" position. To put the cabinet on standby, press and hold down the
( ) button for several seconds.
The display switches between the internal temperature and the OFF display (the cabinet is no longer
operating, only the display is active).
To reactivate the cabinet back on, press and hold down the ( ) button for several seconds until just the
temperature is displayed.
To set the temperature of your wine cabinet
The temperature of your wine cabinet is set entirely from the control panel.
Press and hold down the SET button for a few seconds until the temperature setting flashes.
•
•
10
1
2
3
4
Temperature display: displays the actual temperature inside your wine cabinet. It is therefore
necessary to wait before your new setting takes effect.
Simply press and hold down SET for a few seconds to see the temperature setting.
Buttons ( / / SET) : allow you to select the desired temperature inside the cabinet.
Standby button ( ) : allows you to switch the cabinet on and put it on standby.
• Set the desired temperature using the
Confirm your programming by pressing the SET button. If you do not confirm your setting
with this key, your modification will not be registered.
and buttons.