Maintenance; Security Protection - Vortice CALDOPRO PLUS series Betriebsanleitung

ENGLISH
- appliance always on (fig.7);
7 7
- appliance that switches off after the time set with
the knob has elapsed (fig.8).
8 8

Maintenance

CALDOPRO PLUS does not normally require any
special maintenance; simply remove the dust that
forms with a soft dry cloth or, if necessary, moisten it
with lukewarm water and a neutral detergent; too
much dust accumulating can cause the appliance to
overheat.
N.B.:
Before carrying out any type of maintenance work,
turn the appliance off and unplug it from the power
supply.

Security protection

N.B.: The appliance is fitted with a safety device
(automatic reset) that cuts off the power supply to the
heater element to prevent any damage in the event of
overheating. Should overheating occur, the appliance
continues running in order to benefit from the cooling
effect created. To avoid the harmful effects of continual
switching on and off, it is necessary to remove the
cause of the trouble (grilles obstructed, appliance
tipped over, fan jammed, etc).
15