Powering On And Off - Niceboy HIVE PODSIE Bedienungsanleitung

INITIAL START UP AND PAIRING
1. Take both headphones out of the charging box and take off the labels protecting the char-
ging pins (3) on the headphones.
2. Power on the headphones with one long press of the multifunctional button (2) on both
headphones.
3. The headphones will power on and pair together. After the LED diode (1) begins to flash
both blue and red, the headphones are prepared to connect to Bluetooth.
4. Open the Bluetooth settings on your own device and search for "Niceboy HIVE podsie" on
the list of available devices.
5. Once the pairing is successful it will be announced by an audible queue and the LED
diode (1) will stop shining.
Just take the headphones out of the box to connect them again to a previously connected
device. The headphones will automatically power on and connect to the device.

POWERING ON AND OFF:

Just take the headphones out of their charging box to power them on or manually power on
the headphones by long pressing both multifunctional buttons (2).
To power the headphones off, just place them back in their charging box. They will power off
themselves and disconnect from your device. The diode (1) will shine red once the headpho-
nes have been correctly stored in their box. The diode will stop shining when the headphones
have charged 100%. You can also power off the headphones by long pressing both multifuncti-
onal buttons for about 10 seconds.
MULTIFUNCTIONAL BUTTON - BASIC CONTROLS
One press of any button - playback/pause, accept/end call
Press the right button twice - increase the volume by 1
Press the left button twice - decrease the volume by 1
Long press the right button - next track, reject call
Long press the left button - last track, reject call
9