DF-models SkyWatcher OPTICAL Flow Anleitung Seite 24

1.How to download, install and use the camera's
software
For iPhone, please scan the QR Code (Apple Software) on the
packaging or below, or type WOWITOYS , to go to the App store to
download the software; For Android mobile phone, please scan the
QR Code (Android Software) on the packaging or below, or type
WOWITOYS, to go to the Android Eloquent Market / Google play
to download the software.
WOWITOYS
Connect to the APP:
1.Turn on the drone.
2.Enter the "Settings" menu of your mobile device.
3.Then turn on "WIFI" and connect to the APP of the drone.
4.Enter the control interface of this APP, you would see the
real-time video from the drone camera, and you now can start
your flight.
5.Click the "Settings" icon on the APP's interface, turn on the
Altitude hold button.
6.To begin flying, press START button once, the propellers will
start to spin slowly by itself, it is a signal to tells the drone is
ready to fly. If no further action after this signal in next 15-20
seconds, the propellers will stop spin by itself, if so, press the
START button again, it is ready to fly again.Push the left hand
throttle lever up, the drone will go up and the drone will stay at a
fixed height when release the left hand throttle lever.