DF-models SkyWatcher OPTICAL Flow Anleitung Seite 21

Features
1.Speed modes:
Select between 3 speed modes:
40% speed (controller makes 1 beep);
60% speed (controller makes 2 beeps);
sport mode, speed > 10m/s
100% speed (controller makes 3 beeps)
3
1
o
2.360 Flips:
o
Perform 360 flips by pressing the "flip" button & immediately after
press the "throttle right stick" in the desired direction
3.Headless mode:
To activate headless mode,press "headless" button & the drone will
fly in the desired selected direction, regardless of the direction the
drone is facing
4.Optical flow mode / normal mode:
The drone starts flying in the optical flow mode(default setting),
press the switch button to switch to the non-optical flow mode
(normal mode).
5.LED:
Press the LED button to turn off/on the lights
2
4
10
7
5
8
6.Calibrate the Gyro:
Press this button to calibrate the gyro.The LED indicator lights on
the drone will blink and turn solid which means calibration is
completed.
7.To take a photo:
Press once the photo button, the LED on the drone will blink
once.
8.To record a video:
Press once the video button, the LED on the drone will blink
twice. Press the same button again to stop recording, the LEDs will
blink twice again.
To download your photo and video files:
• The photos and videos are stored in the smart phone.
• Make sure the smart phone is connected to the camera signal
successfully before taking the photos and videos.
6
11