DF-models SkyWatcher OPTICAL Flow Anleitung Seite 19

Pairing your drone to the controller
power swith
1. Turn on the remote control
2. Connect the battery to the drone and turn on the drone. The LED on
the drone will flash.
3. Place the drone down on a flat surface, and make sure that the head
of the drone is facing the front and the tail facing the rear (player).
6
4. Push left throttle up once & controller will beep once
5. Pull left throttle down once & controller will beep once. Pairing is
complete once the drone lights & controller lights stop flashing
Flying your drone
Take Off/Landing
Method 2
Take off Method 1
Landing Method 1
7