DF-models SkyWatcher OPTICAL Flow Anleitung Seite 18

4xAAA batteries
(not included)
.
. Always use alkaline batteries
Never mix old and new batteries
1.Unscrew the battery cover,and insert 4xAAA batteries(not included),
making sure you insert them following the correct polarity as shown
2.Re-attach the battery cover
Drone's details
Propeller A
(Clockwise)
Propeller B
Camera
(Counter Clockwise)
HEAD
It is crucial that all the propellers are installed in the correct position
(Pay attention to the letter A or B printed underneath each propeller.)
Propeller B
(Counter Clockwise)
Propeller A
(Clockwise)
4
Charging the drone battery
1. Remove the battery from the drone & insert the charging wire into the
battery charging slot
2. Connect the USB charger (square socket) to a computer, the USB
indicator will glow red
3. The red light will go off when the battery is fully charged
WARNING
Do not leave the battery unattended while charging & only use
the supplied battery or plug charger.
insert the battery
into the drone
5