How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation - INVENTOR GR1VI32-12WF Benutzerhandbuch

How to use the buttons

Auto operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MO D E button to select Auto.
2. Press the U P /D O W N button to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the O N /O F F button to start the air
conditioner.
NOTE
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
ambient room temperature and the setting
temperature on the remote controller .
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MO D E button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the U P /D O W N buttons to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the FA N button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the O N /O F F button to start the air
conditioner.
NOTE
In the F AN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature eithe. In this
case, only step 1, 3 and 4 may be performed.
7
7
8
O O O
O O O