6.
Changing the battery
Figure 3
1. „
" in the left corner of the display indicates that it is necessary to replace the battery.
However, accurate measurements may still be made for several hours after the "Low Bat-
tery" indicator first appears.
2. Remove the protective cover before replacing the battery. To replace the battery, remove
the Battery Compartment Cover (Figure 3) on the rear of the meter.
3. Remove the battery, install a replacement one (006P DC 9V battery (heavy duty type),
MN1604 (PP3) or equivalent). Ensure Polarity is correct. Replace the battery compartment
cover.
7.
Accessories
24430
Probe for salt (K = 1.0), 2-pole graphite
SensoDirect 110
9