Behaviour In An Emergency Situation; Tragegurt; 1X Shoulder Strap; Spare Parts - ATIKA LSH 3000-2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für LSH 3000-2:

Originalbetriebsanleitung (4 Seiten)

100

Inhaltsverzeichnis

Verfügbare Sprachen

 Wear protective clothing:



safety goggles



ear protection (Sound intensity level at workplace can

exceed 85 dB (A)



it is recommended to wear a face guard to prevent

irritation due to dust.

 Ensure that you have stand in a secure standing position

and maintain your balance at all times. Do not bend

forwards.

 When working on slopes always make sure to have a safe

standing position.

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Be careful when stepping back! Risk of stumbling!

 If you come across to foreign objects, please power off the

device and remove those foreign objects. However before

you restart the device, check it for possible damages and

have it repaired if necessary.

 Take into consideration environmental influences:

Do not use the device in moist or wet ambience.



Do not expose the device to rain.



Do not work in bad weather conditions (e.g. rain, risk of



lightning).

Do only work with sufficient visibility conditions.



Provide for good illumination.

 Keep bystanders and animals away from your working

area.

Do not allow other persons, especially children, to touch

the tool or cable.

 Switch off the machine if persons, in particular children or

pets, are close to you or if you change your working area.

 Within his area of work the operator is responsible for third

parties.

 Keep children away from machine.

 Never operate the machine if other persons are in the

immediate vicinity.

 The user is responsible for accidents with other people or

their property.

 Never leave the device unattended.

 Do not overload the machine! You work better and safer in

the given performance range.

 Never operate the unit



with damaged protective devices or covers



without protective devices, e.g. collecting bag



with damaged or worn cable.

 Do not modify anything on the machine that could impair

its safety.

 Faulty or damaged parts in the device must be replaced

immediately.



Never leave the machine powered when tipping it over on

its side. The machine is designed for operating in upright

posture.

 Do not spray machine with water (this is hazardous due to

live components).

 Switch the machine off and remove the mains

plug from the socket when

carrying out repair works



carrying out servicing and repair works



removal of faults



eliminating blockages



checking the connection cable for damage and

entanglement during operation

transporting



leaving unattended (even during short interruptions)



unusual noises and vibrations

 Do not touch dangerous moving parts before the machine

has been isolated from the electric supply and such

moving parts have come to a dead stop.

 Thoroughly maintain your garden vac:



Make sure that the ventilation apertures are free.



Keep handles dry and free of oils and grease.



Follow the maintenance instructions.

 Check the machine for possible damage



Before continuing to use the machine, the protective

devices must be inspected to ensure that they work

perfectly and with their intended function



Check whether the parts are damaged. All parts must

be correctly installed and fulfil all conditions to ensure

perfect operation of the saw.

Damaged guards and parts must be properly repaired



or exchanged by a recognized, specialist workshop;

insofar as nothing else is stated in the instructions for

use.

Damaged or illegible safety warning labels should be



replaced immediately.

 Store the unused machine in a dry locked place away from

the reach of children.



Refer to the enclosed brochure "General safety

instructions" for additional safety notices.