Herunterladen Inhalt Inhalt Diese Seite drucken

hajdu ZV80Erp Aufbau- Und Betriebsanleitung Seite 22

Druck-heisswasserspeicher
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
The hot water tank with closed internal circulation system performs hot water
supply for several water connection points in household and in institutions.
The hot water provided by the unit can be used for washing and eating
purposes.
The water has drinking water quality if it complies with limit values as defined
in Government Decree of the Republic of Hungary No. 201/2001. (X.25). The
temperature of the water stored in the unit can be set according to your
needs, up to 80 ºC. After reaching this temperature, the temperature
controller switches off heating automatically. This way, the water tank
supplies hot water for a long time. The polyurethane insulation covering the
internal tank impedes rapid cooling down of the water, this way, the water
tank supplies hot water for a long time. The storage structure ensures that
hot water outflows without mixing.
The internal tank is made of anti-corroding steel plate. Besides a specially
fired enamel coating, an active anode also protects the steel plate against
corrosion.
The specially fired enamel design provides long life in case of aggressive (soft)
water. The main outline dimensions of the water storage are described in
Figure 1. The horizontal placement of the unit permits installation in locations
where vertical placement of the unit would not be possible due to height
limitations.
4. STORAGE INSTALLATION / DEPLOYMENT
Pursuant to regulations of Hungarian Standards IEC 60364 / MSZ HD 60364,
the hot water storage must be installed and connected to pipeline and
electricity by a professional technician.
Before installation of the unit, a professional architect has to analyze the
structure of the wall where the unit will be mounted.
The following solutions are proposed in case of different wall types:
Stone, brick and concrete walls of thickness of 100-150 mm: hex head
bolts (Hungarian Standard M 12, MSZ EN ISO 4017), bolt washer for
wood connection (M 12). It is mounted with horizontal flat steel of 50 x
5 at the back side of the wall.
EN
22

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Zv150erpZv200erpZv120erp

Inhaltsverzeichnis