ConformX
2-WAY TURN MATTRESS OVERLAY
Product Description
®
The ConformX
overlay design comprises of a 2-way turn visco
elastic foam with a 2-way stretch, vapour permeable, water
resistant cover.
Cover
Clinical applications
Indications for use
ConformX overlay is suitable for comfort only.
The cover of this product is vapour permeable but not air
permeable and may present a suffocation risk. It is the
responsibility of the care giver to ensure that the user can use this
product safely.
Instructions for use
1. Remove all packaging.
The mattress overlay must be placed with the contoured surface
facing up.
2. Lay the ConformX mattress overlay on top of a normal
mattress ensuring that there are no sharp edges which may
rip the cover.
DO NOT USE THE MATTRESS WITHOUT A COVER
It provides a protective barrier, which helps to extend the life of the
product.
3. Use the four corner straps to safely secure the overlay to the
underlying mattress.
4. Ensure that the correct month is showing on the
TURNTABLE™ indicator at the foot end of the mattress. If the
correct month is not showing, rotate the mattress so that the
correct month is at the foot end. Months are indicated as
follows:
1/12 = January
2/12 = February etc.
5. Use the TURNTABLE indicator as a guide for the monthly
rotation and turning of the mattress. This helps to even out
wear of the mattress and to extend the life of the product.
Decontamination
To Clean The Cover
Wipe all exposed surfaces with a cloth which has been moistened
in simple detergent and water. Ensure to remove any organic
debris that may be adherent to the surfaces. Dry.
®
TURNTABLE™
Indicator & Cleaning
Instructions
Corner Straps
Concealed Zip
WARNING
WARNING
To Disinfect The Cover
For disinfection we recommend a chlorine-releasing agent such as
NaOCl or NaDCC diluted to 1,000 ppm (range may vary between
250 & 10,000 ppm depending on contamination status and local
policy).
Alternatively use a cloth moistened with alcohol (70%) and allow
to air dry.
Routine checks
The foam core and cover should be inspected regularly for any
signs of damage, soiling or staining.
Disposal
For ultimate disposal of ConformX products, we recommend the
following advice be followed. However, regardless of this, please
ensure that local regulations and, if applicable, healthcare facility
standard operating procedures are followed.
•
Foam cores suspected of contamination should be disposed
of as clinical waste.
•
Foam cores not suspected of contamination may be disposed
of through landfill waste.
Warranty and Service
Arjo's standard terms and conditions apply to all sales. A copy is
available on request.
These contain full details of warranty terms and do not limit the
statutory rights of the consumer.
For service, maintenance and any questions regarding this, or any
other Arjo product, please contact Arjo.