Inhaltsverzeichnis
Werbung
Appendix
6
Remove the rubber cover.
7
On the right side of the speaker's interior, remove the sticker and the four screws from the
component that the sticker was attached to.
8
Remove the component and the disconnect the ribbon cable.
9
Remove the rubber cover from the ribbon cable and pull the ribbon cable from the
speaker.
10
Remove the eight screws from the edge of the battery compartment.
1 1
Disconnect the four cables from the circuit board.
12
Remove the battery box.
13
At the top of the battery box, unhook both sides of the circuit board.
14
Disconnect the battery connector and remove the batteries.
English (UK)
21
19
Werbung
Inhaltsverzeichnis
