Herunterladen Inhalt Inhalt Diese Seite drucken

Peavey Escort 6000 Bedienungsanleitung Seite 27

Tragbares pro-audio-system
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 50
When your Escort
6000 successfully pairs and connects with your phone or music device, the Bluetooth
Active LED changes from flashing to
®
®
steadily lit. You will now be able to play music from your connected music source through your Escort 6000. The level can either be adjusted
from the connected source or by the level control in channel 9.
*Wireless range can vary depending on Bluetooth class of source device, and may be subject to interference from obstructions such as walls
or other electronic devices.
EQUALIZATION:
Using the Graphic Equalizer
Unlike the HIGH, MID-MORPH, and LOW controls on each channel that adjust only the
tone of their own input signals, the seven-band graphic equalizer adjusts the tonal
balance of all the signals going through the powered mixer. This graphic equalizer
is also a powerful tool to help reduce or eliminate acoustic feedback. This offers the
user great flexibility in adjusting the sound, but use moderation in making these
adjustments.
FLS
Feedback Locating System
®
The FLS (Feedback Locating System) LED indicators are invaluable tools in helping to
reduce/eliminate feedback. Acoustic feedback is the loud howl or squealing sound
heard through sound systems as the result of sound from the speakers re-entering the
microphones. To use the FLS feature, start by setting all graphic EQ sliders (Fig. 20) to 0.
Then before the audience arrives, increase the MASTER LEVEL and/or CHANNEL LEVEL
until feedback occurs. Note which LED illuminates and slightly lower the corresponding
slider. This reduces gain at the feedback frequency and can be repeated if necessary to
improve gain before feedback. Only adjust the sliders a small amount to avoid adversely
affecting sound quality.
GENERAL USE TIPS:
Avoiding Acoustic Feedback
When encountering feedback it is always best to start looking at the placement of the mics and speakers in the system before resorting
to equalization (EQ) adjustments. Make sure that the speakers are positioned to direct the sound toward the audience and away from the
microphones. Position mics as close to the sound source as reasonable. Moving the mic closer increases the volume of the sound through the
system without having to turn up the gain.
Microphone Usage Guidelines
When practical, a single microphone is preferred. Additional microphones pick up more sound from the speakers and each mic must then be
turned down to prevent feedback. However, if you have difficulty balancing the level of different individuals with one mic or if you still cannot
get sufficient gain, using more mics can offer an advantage. For example, giving several singers their own microphone allows placement of
the microphones much closer to each singer. This increases the volume of the sound at the mic and far outweighs any detrimental effect from
using multiple mics. It also allows the volume of each mic to be adjusted separately for proper balance.
Packing the Escort
®
One of the Escort's many benefits is that the entire sound system can be packed inside its easily transportable case (Fig.21). Begin by folding
the speaker stands, then secure them into their storage compartment using the two straps. Place the optional microphone(s) in their storage
compartment, putting the cables in the other compartment or with the speaker stands. Lay the speakers face down on top of the bottom tray
and secure the four latches. The Escort is now ready to be carried or pulled on its built-in, luggage-style wheels.
Fig. 21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis