Connecting The Hoses - Alphacool EISWAND Anleitung

Connecting the Hoses

1. Cut the hose roughly to size
2. Connect hoses to the CPU cooler - Screw hose fi itings into the cooler
3. Connect hoses with quick-release fasteners
 The quick-release fasteners are not absolutely necessary, but they
simplify maintenance and modifying the cooling system.
 If necessary, you can also cover the hoses with the included anti-kink
springs.
4. Connect the quick-release fasteners with the external radiator
 Make sure the outlet on the CPU cooler is connected to the inlet on
the external radiator.
8 8
- Verschlauchen - Installation des tuyaux
- Unscrew coupling nut
- Attach hose
- Seal with coupling nut
installing quick-release fasteners