How To Start Collective Operation - Toshiba TCB-SC642TLE Benutzerhandbuch

How to start collective operation

To start collective operation (ALL or ZONE)
1
2
7
Power Turn the power supply switch on 12 hours or more before starting operation.
1 Press the SELECT button and select ALL or ZONE.
In case of ZONE collective operation.
2 Select the ZONE No. to be operated by pressing ZONE button.
3 Set the operation mode by pressing the MODE button.
4 Press the ON button.
5 Set the desired temperature by pressing one of the temperature setting buttons
6 Set the desired fan speed by pressing the FAN SPEED button.
7 Select the control mode.
Stop Confirming the ZONE No. to be selected or ALL indication, press the OFF button.
NOTE
OI-673-09EG
In the ALL or ZONE mode, no flap setting can be performed. If necessary, you should
select the GR mode and use the FLAP button.
4
Stop
3
5
6
.
9